|
Problem |
Solution |
|
My K1 stays on the surface of the water and will not sink: |
The K1 when brand new traps air and floats. When it has come into contact with
pond water, it gets a slimy coating which prevents air bubbles getting caught
inside. Pushing it under the water continuously for a short period of time will
help |
|
The K1 doesn’t move well during the cleaning cycle |
The air pump is either not powerful enough or there isn’t enough water in the
Pod – check that you used the cleaning pipe to maintain the level on a pump fed
system. Check all air fittings and line for leaks. Make sure you haven’t
inadvertently added more K1 than the 30 litres |
|
The pond gets dirty after cleaning |
Check that you turned your circulating pump off and that you have used the
cleaning pipe, so that the dirt in the K1 hasn’t returned to the pond. |
|
Too much maintenance, poor clarity, or Pod overflowing |
Make sure that you haven’t exceeded the maximum flow rate |
