Levolor Technical Information

Specifications:

• Accurately manages levels to within 1/16”.
• 110/220 VAC – 50/60 Hz: specify voltage required when ordering.
• Certified by ETL to UL standards.
• Solid state electronic controls.
• Operates a 24 actuated valve (not included but readily available).
• Capable of driving a 24 relay contact to operate a circulation pump.

Dimensions:

• Weatherproof control box – 10” x 5” x 4.5” (install at equipment pad wired to load side of time clock).
• Dome-shaped sensor – 1” x .75” (Install in skimmer basket, static pipe, or anywhere accurate water level can be determined).
• 50 feet of solid core #18 wire included. Sensor wire should not be spliced or submerged in water.

Installation:

• A licensed electrician can install the control box in less than 1 hour.
• 24 VAC Solenoid-actuated valve required for installation (not included, but readily available at hardware stores).
• No structural modification to the deck or pool required.
• Sensors attach to wall of skimmer or static pipe.