|
Plumbing Parts
Gate Valves
Super for waste drains and low-pressure aquaculture. Knife gate valves are economical, quick-acting valves for clean and dirty water low pressure applications. They have become very popular in the aquaculture industry for several reasons. They can be easily taken apart and the seals can be changed, even the valve body can be changed, without upsetting the ends that may be glued to your pipes. So they can be used in place of unions! If you have a valve glued in place, but want to take it out, you can simply unbolt it and purchase new side pieces. They offer unrestricted flow and are quick-opening, 100 percent water tested at the factory and quite low in cost. These 1 1/2" to 8" valves are all PVC with stainless steel shafts, polypropylene knife gates (except for 4", 6" and 8", which are stainless steel), and have Santoprene™ seals. The valves listed are all slip by slip, but please note that you can order sides in various other styles. Like most valves, they are not for use in freezing weather. One-year warranty.
Valve Prices:
|
2" Ball Valve: $15.00
| |
|
2" Gate Valve: $20.00
| |
|
3" Gate Valve: $26.00
| |
|
4" Gate Valve: $73.00
|
Inlet Strainer
Don't let debris clog your pump! Attach a strainer to the input of your pump. Made from high-density polyethylene.
Strainer Prices:
|
1 1/2" Strainer: $8.50
| |
|
2" Strainer: $8.50
| |
|
3" Strainer: $16.50
|
Bulkhead Fittings
These female threaded bulkhead fittings are great for most bulkhead applications. Made of polypropylene, they are similar to, but softer than, the PVC bulkhead fittings. Price includes one EPDM gasket.
Bulkhead Prices:
|
2" Bulkhead: $13.50
| |
|
3" Bulkhead: $23.50
| |
|
4" Bulkhead: $52.00
|